Banner: Porcelain Grace, Meryl Ruth, Fine Art

 

GLOSSARY  FOR CERAMIC ART TERMS

 

A   B .C  D  E .F  G  H  I. J. K. L. M. N. O. P  Q. R  S. T. U. V. W  X. Y. Z.


 

A

 

 

Acrylic paint

An emulsion of pigment to form a fast-drying paint that is water-soluble but permanent after it dries; useful primarily for cold finishes.
See Cold finish

 

Air-brushing

Technique for applying a thin liquid slip, glaze or stain in nebulized form to the surface of a ceramic work by means of an air-spray device.
See
Air-compressor, Glaze, Slip, Spraying, Stain

 

 

Air-compressor

Device for providing high-pressure air-spray through a jet nozzle for the purpose of applying nebulized liquid slip, glaze or stain to the surface of a ceramic work.
See
Air-brushing, Glaze, Slip, Spraying, Stain

 

 

Altering form

After a clay piece has been formed on a potter’s wheel, its uniform shape and configuration can be modified by hand or with simple instruments. This process is called altering. An example is the formation of a pouring lip by pinching the clay at the rim of a vessel.
See
Impressing, Incised decoration

 

 

Amaco velvet underglaze

A versatile semi-translucent, lead-free underglaze that yields two different finishes when left unglazed, velour or velvet. Colors intensify when subsequently covered with gloss glaze.
See
Glaze, Gloss glaze, Overglaze, Satin glaze, Underglaze, Velvet glaze

 

 

Amorphous

Term applied to materials like glass which have no regular crystalline structure. Clay becomes amorphous when subjected to vitrification at very high kiln temperatures.
See
Clay, Kiln, Vitreous, Vitrification

 

 

Anvil

See Paddling

Return to top

B

 

 

 

Banding wheel

A rotating wheel for holding a ceramic work in place and rotating it while it is being decorated with a spray of thin liquid colored glaze. The wheel can circle around slowly or quickly depending on the artist's objective. The less the work is handled before firing, the better the piece will be because handling can stress the clay and smear the surface designs. The banding wheel has concentric circles on the head to allow for easy centering. The banding wheel is particularly useful for easily and consistently spraying a ceramic vessel while it spins around.

 

 

Baroque gilding

Gilding is the application of gold leaf to a surface. The gold can be burnished to a high gloss or left satiny without burnishing. Gilding is an ancient art, but grew more ornate and sophisticated from the 17h Century Baroque period and subsequently.
See Gilding

 

 

Bas-relief

See Relief 

 

 

Bisque

A ceramic work that has been fired for the first time at high temperature to convert it from the greenware state to a hard condition, prior to glazing. The temperature to which it is exposed in the kiln is not enough to produce vitrification. Firing makes the piece hard and resistant, but it remains somewhat fragile and porous, although not as fragile as in the greenware state.
See
Bisque firing, Drying, Firing, Greenware state, Leather-hard state, Kiln, Vitrification, Wet State

 

 

Bisque firing

Initial kiln firing in which clay hardens without vitrifying. It is porous, but no longer capable of softening in water.
See
Bisque, Firing, Kiln, Vitrification

 

 

Bone dry

The driest state of raw clay in the sequence of wet, leather-hard and bone dry (also called greenware). In the wet phase, the clay is too soft and unstable to maintain its shape; in the leather-hard phase, it is wet enough for altering and other modifications; in the bone dry phase, it is too brittle to avert chipping, but ideal for safe kiln firing.
See
Bisque, Drying, Greenware state, Leather-hard, Wet state

 

 

Buckram replacement

Felt and felt-like textiles are used in fiber art work when rigidity is needed. Synthetic felt-like fabric (commercially available as Fosshape) is particularly valuable because, in contradistinction to felt, it can be stiffened without water or toxic additives, by applying heat in the form of a hot air gun, fabric steamer or steam iron. Furthermore, this material can be cut with scissors and sewn together. It is mildew resistant and capable of being dyed and painted with fabric paints. I experimented with it in my search for a method to enhance its structural integrity and hardness. I ultimately found a simple novel method for achieving my artistic goal by using a conventional oven for baking preformed three-dimensional designs of felt panels sewn together. An optimal combination of temperature and duration, specifically 230℉. for 30 minutes, proved ideal for my purposes. Prudence dictates constant vigilance to ensure against burning the artwork during the baking process.


           

 

Return to top

C

 

 

Calipers

An adjustable measuring instrument consisting of two curved parts joined at one end where they are hinged. It is used for measuring the internal or external dimensions of an object, such as the diameter of an opening for making a fitted lid.

 

 

 

Carving

Analogous to sculpting, carving is a method for modifying clay  forms before they are fired. Whereas sculpting adds pieces of clay to build the work, carving generally means the opposite, namely, taking bits of clay away from the form. It is usually done using a knife to scrape, scratch, chip, sand or use other methods to remove pieces of clay bit by bit. Carving is less forgiving than sculpting by virtue of the risk that uncontrolled chipping will inadvertently dislodge parts that the artist wishes to retain. Carving, therefore, is trickier to do, is less spontaneous, and requires greater finesse than sculpting. Further, sculpting is done while the clay is in a wet state, while carving is limited to the drier greenware state where it is more vulnerable to irreparable damage.
See Altering form, Greenware state, Sculpting, Wet state

 

 

 

Cast

See Latex mold, Mold, Slip, Slip cast molding, Slurry

 

 

Ceramic

Hard, porous and brittle heat-resistant material made by firing preworked clay in a kiln at high temperatures.
See Clay, Earthenware, Porcelain, Stoneware

 

 

Ceramicist

Artist who creates three-dimensional clay-based art works in the form of ceramic creations.

 

 

Ceramics

A term of art for the technique of making objects with fired clay. While clay has been integral to fine art ceramics since prehistoric times, it also has a long history of use in decorative, industrial and applied arts.

 

 

China paints

Low-temperature colored glazes applied over previously fired high-temperature glaze. They provide greater detail and brighter colors, but are susceptible to surface abrasion.
See
Glaze

 

 

Chuck

A temporary device for holding a ceramic piece in place over a wheel while it is being tooled or trimmed. It is made of a thrown base of wet or bisque-fired clay, in the form of a cylinder open on both sides.
See
Trimming, Wheel throwing

 

 

Clay

A naturally-occurring soft, earthy material formed from physical breakdown or chemical weathering of rocks. It is also made by crushing and pulverizing fine-grained rock, such as feldspar or granite. It is slippery and plastic when wet so it can be worked into art forms. Drying in air gives it a leather-like texture. It is converted to very hard rock-like consistency byfiring to high temperatures in a kiln.
See
Ceramic, Earthenware, Leather-hard state, Porcelain, Stoneware

 

 

Clear glaze

Colorless, transparent glaze.
See
Glaze, Gloss glaze, Matte glaze, Satin glaze

 

 

Cold finish

Application of various finishing touches to a ceramic work to complete it after the final kiln firing. It includes a wide variety of techniques including use of enamels, gilding, acrylics, colored waxes, colored pencils, pastel, beads, gemstones, and other materials.

 

 

Cone

A small slender pyramid made of clay and glaze intended to melt and bend at specific temperatures. It is used in a kiln to determine when the optimal kiln temperature for a given ceramic piece has been achieved. Cones are designed by mixing combinations of clay and flux materials so they respond to a narrow range of temperatures at which they reliably bend, making them accurate means for assessing kiln temperature. Also called pyrometer or pyrometric cone.
See Cone temperature

 

 

Cone temperature

In practice, three cones are placed within the kiln firing chamber within view at the peep hole. Each is expected to bend at a different temperature during firing, bracketing the optimal temperature for a given ceramic object. When the cone sensitive to lower temperature melts, it indicates that the kiln temperature is approaching optimal. When the optimal-temperature cone melts, the firing ends and the kiln is allowed to cool. If the cone that indicates temperature exceeding optimum should bend, it demonstrates that the piece has been subjected to excess heat in firing.
See Cone, Firing, Kiln, Peep hole

 

 

Crazing, Crackling

A network of fine hairline cracks in the glazed surface of a fired ceramic work. It can be intentional, as in Raku firing, or an adverse consequence of a thermal expansion mismatch between the glaze coating and the clay body during cooling. Crackling is the term usually reserved for desired crazing done deliberately for decorative effect; while crazing applies to faulty, unintentional fractures in glazing.
See
Raku firing, Raku ware

 

 

Cut Stencil Silk-Screening

A silk-screening technique that uses a green film, called S3S Stay-Sharp Lacquer Film. A design is cut into the film. This is a laborious method that precedes application of the film to a silk-screen frame, allowing it to be used in a method similar to photo silk-screening. Ink is applied to the film surface and spread by means of a squeegee across the frame. The design on the film is transferred to flat slabs of clay placed under the frame.
A special modification of this technique, which I invented, permits application of a silk-screened image to an irregular surface. Because the application of silk-screening is limited to objects with a flat surface, a special procedure had to be devised. To achieve this, I make a cut stencil silk-screen and adhere it to the silk-screen frame with adhering fluid in the usual manner. But then I cut it right out of the frame with the film adhered into the silk-screen. I then cut it to precisely fit the flat part of a ceramic object, such as a plate or bowl. These cut segments are placed directly on a desired surface and, once in place, the silk-screen image is air-brushed on, rather than applied by using a squeegee.
See Air-brushing, Clay slab, Image transfer, Photo silk-screening, Silk-screening, Silk-screening on nonplanar surfaces

Return to top

D

 

 

Decal

Image transfer is facilitated by embedding images on inorganic material, consisting of powdered ground glass, that fuses permanently with the surface of a ceramic work during kiln firing. Because decals are created in multiples, they can be used to embellish clay works without the need to repeatedly draw or paint the same design.
See Image transfer

 

 

Decoupage

A technique for decorating the surface of an object by gluing cut-outs of various flat materials, such as paper or fabric, and then applying multiple layers of varnish or lacquer. From the French decouper, to cut out; also called Japanning.

 

 

Dremel drill

A device for drilling tiny holes into ceramic surfaces, often arranged in intricately-designed patterns. It uses diamond-tipped drill bits which resist damage from the hard substance they have to pierce.

 

 

Drying

Act of allowing wet clay to dessicate over time so that it can be worked on in its leather-hard state or kiln fired in its bone dry state. Drying process can be accelerated by using a hot-air gun. Wet clay can be rolled out, bent, modeled, thrown, and otherwise worked into forms; in a somwhat drier state (but not yet leather-hard), its surface can be decorated with silk-screening; in its still drier leather-hard state, carving, incising, altering, joining and trimming can be done; in the bone dry or greenware state, the clay is ready for optimal kiln firing.
See Bisque, Bone dry, Greenware stateHot-air gun, Leather-hard state, Wet state

Return to top

E

 

 

Earthenware

A type of clay used for pottery since ancient times. It is of variable composition. It is fired at relatively low temperatures of 1,830-2,010°F (990-1,100°C) or cones 02-06. It is not as strong or resistant to chipping as stoneware, but has the advantage of being lower in cost and easier to work with. Because it is so porous, vitreous glazing is required to make it functionally water tight.
See Clay, Porcelain, Stoneware, Vitreous

 

 

Embossing

See Impressing

 

 

Engobe

Decorative underglaze in the form of a slip containing less raw clay content for application to thoroughly dried greenware and bisque-fired clay. It is intended to reduce shrinkage during the drying period.
See Glaze, Overglaze, Slip, Underglaze

 

 

Extruded clay

Clay strips that are formed by an extruder in various designated lengths and shapes according to artistic need.
See Extruder, Extruder die

 

 

Extruder

A device that forces plastic raw clay through a die to produce extruded clay strips in a variety of shapes.
See Extruded clay, Extruder die

 

 

Extruder die

A clay extruder die is firmly attached --- by a screw-on, twist-on or bolt-on die holder --- at the exit end of an extruder device to impart a uniform desired shape to a length of clay. It is used for making handles, tubes, coils or any columnar ceramic component or product. A die can be designed to make solid or hollow forms in various patterns, such as circle, square, rectangle, hexagon or more intricate shapes. Dies are commercially available or self-made, created from sheet metal, aluminum, wood, plastic or even vitrified clay. The die makes the extruder an indispensible functionally versatile tool.
See Extruded clay, Extruder

 

Return to top

F

 

 

 

Felt

Felt is a sturdy textile used in fiber art work for both structure and design. It is produced by matting, condensing and pressing natural wool or synthetic fibers.
See Buckram replacement.

 

 

Fimo clay

A commercially available polymer modeling clay that can be baked to mature at kitchen oven temperatures of 265°F (130°C). It comes in a number of colors. When fired, it is hard in consistency and water resistant.

 

 

Firing

The process by which preworked clay is converted from its soft greenware state to its hard ceramic form by exposure to very high temperatures in a kiln.
See Ceramic, Greenware state, Refiring

 

 

Foot

Treatment of the undersurface of a ceramic plate or other object that serves to provide balance and stability to the work. Created by the process of trimming.
See Trimming

 

 

Fosshape

A synthetic felt made commercially is a more durable and workable product than fiber felt. Moreover, it can be hardened for art works by means of hot air gun, steam iron and, especially, by baking in a regular oven.
See Buckram replacement.

Return to top

G

 

 

 

 

Gilding

See Baroque gilding

 

 

Glaze

Colored and clear silicate coating that forms a glass-like coating by fusion under high heat. It is a powdered ceramic material prepared in water suspension. It melts smoothly and bonds to the clay surface during kiln firing. It is a vitreous coating with added flux to lower its melting point and metallic oxides for color. It is impervious to damage from the high temperatures of the kiln. Glazes are applied to bisque for purposes of decorating a ceramic work or making it water tight.
See Bisque, Gloss glaze, Matte glaze, Satin glaze, Vitreous, Vitrification

 

 

Gloss glaze

Glaze that retains its shiny reflective glossy surface appearance after firing.
See Glaze, Matte glaze, Satin glaze

 

 

Glossification

See Vitrification

 

 

Greenware state

Clay that has been worked and allowed to dry in air beyond  leather hard, but not yet fired. Clay is most fragile in this state. Green or greenware refers to bone dry, unfired clay with no moisture left.
See Bisque, Bone dry, Drying, Leather-hard state

Return to top

H

 

 

Hand building

The process of forming plastic ceramic objects from raw clay by the artist’s hands alone or with simple tools, unassisted by use of the potter’s wheel. Techniques in hand building include altering, pinching, coiling and slab construction, among other types of modification of the clay structure. 
See Slab building.
For illustrated details see also Technical notes: Hand building

 

Hollowing

A technique for removing the internal core of clay in the leather-hard state of drying for purposes of creating a cavity in a ceramic work and making the walls uniformly thick. This essential step is needed to prevent irreparable damage that is likely to occur from exposure to high temperatures during the kiln firing process.
See Drying, Kiln firing, Leather-hard state
For illustrated details, see also Technical notes: Hollowing

 

Hot-air gun

Device for accelerating the drying process by high-heat delivered by a hand-held heating unit.
See Drying

Return to top

I

 

 

Image transfer

The process by which images are applied to clay. The image can be in any form, including drawing, photograph, painting, print, stencil, photocopy, among others. The image is transferred onto the surface of the clay by any number of techniques, such as press mold, silk-screen, photo silk-screen, stenciling, decals and mono printing.
See Cut stencil silk-screen, Decal, Photo silk-screen, Press mold, Silk-screen

 

 

Impressing

A method of decorating clay by pressing a textured or patterned material or object into the clay surface while it is still in its wet state. Also called Embossing.

 

 

Incised decoration

A method for treating the surface of a ceramic work by means of a sharp instrument to drag, cut or carve shallow lines into leather-hard clay in the greenware state. It is a technique in use since ancient times.
See Greenware state, Leather-hard state

 

 

Iridescent luster

See Opalescent luster

Return to top

J

 

 

K

 

 

Keraflex porcelain

A commercially available clay-like substrate for creating two- and three-dimensional ceramic art objects. It is manufactured in very thin sheets. The sheets can be cut, bent or folded, and used for hand building. The surface can be modified in various ways, such as embossing. When fired initially to cone 10, this material virtrifies to become a thin translucent porcelain-like structure. In this state it can be glazed and otherwise embellished just like porcelain clay. In another form, Keraflex Porcelain Canvas comes in various flat tile sizes. The tiles can be embellished by glazing. The glaze determines the kiln temperature needed for kiln firing. The canvas has to be warmed before glazes are applied; warming is facilitated by working with the material on a special warming tray. One of the special attributes of Keraflex tiles is that they do not warp the way porcelain tiles do.
See Ceramic, Clay, Earthenware, Porcelain, Paperclay, Stoneware

 

 

Kiln

A special oven or furnace used to fire clay at high temperatures. It consists of several parts: firebox, flue, dome and exhaust vent. Raw clay forms are placed in the firing chamber, kept separated from direct contact with the heat source. As contrasted with open firing, kiln firing uses hot gases to achieve its effect. While it is therefore slower and less economical, it is advantageous in allowing finer and more delicate works to be fired at much higher temperatures, giving the resulting ceramics a generally higher quality.
See Firing, Refiring

 

 

Kiln furniture 

Prefired ceramic structures, made in a variety of sizes and shapes, that are placed within the kiln for purposes of supporting kiln shelves and for propping clay objects that are being fired. They are used to prevent the object from being damaged during the firing process. Kiln furniture can be fired up to cone 10.

Return to top

L

 

 

Lace Draping

A technique based on a lost art method, revived and refined for modern ceramic art work, in which cotton lace is dipped into thin slip and draped on a ceramic object during construction. When dried and fired to high heat in a kiln, the lace is incinerated, leaving the residual delicate clay structure in place.
See Firing, Kiln, Slip

 

 

Latex mold, rubber mold

Cast of an object in three dimensions made by applying layers of liquid latex and an outer layer of reinforcing plaster. Each layer is allowed to dry overnight before the next is applied. This is a lengthy process that forms a negative image of the original, from which a near-perfect ceramic duplicate can be created. The principal advantage of latex, in contrast to press mold in plaster alone, is that it preserves nearly all the delicate features of the original. Further, pressing clay directly into plaster casts requires that the clay be carefully lifted away from the mold. This works best if the cast is relatively flat and without bends, corners or twists; otherwise, the clay form is easily damaged when pulled away from the mold. Using a latex mold, by contrast, allows the pliable rubber to be peeled away from the clay instead, leaving the clay form essentially intact.
See Cast, Mold, Press mold, Slip, Slip cast molding, Slurry

 

Leather-hard state

The state reached after worked clay has been allowed to air dry to the point of stiff firmness, but not complete dryness. In this condition, it feels and behaves like leather. Most of the water content has evaporated, shrinking the work somewhat by compacting the clay particles. It is the state in which structural surface treatments, such as carving or incising or altering, can be done because the clay is still moist enough to permit them without chipping. Joining and trimming clay are done in this state as well as slip decoration. This is the best state of clay for slab construction because the stiff clay slabs remain structurally upright and do not bend as wet clay does.
See Altered form, Bisque, Greenware state, Impressing, Incised decoration, Slab building, Slip, Slurry, Wet state

 

Luster glaze

A metallic overglaze finish. It is painted on the surface of a ceramic piece in liquid form, as a metallic salt in an organic binder, over a previously-fired glaze. It can also be sprayed as a metallic salt dissolved in water into the kiln onto objects at low red heat during the cooling cycle or in a separate firing.
See Glaze

Return to top

 

M

 

 

Majolica technique

Tin-glazed earthenware made opaque by the addition of tin oxide to lead glaze. The glassy dense white glaze developed by firing serves as a strong complementary ground for the overlying hand-painted surface decorations. A second firing makes the glaze interact with the metal oxides in the overglaze to create deep translucent colors typical of this form. The method has been in use to produce white lusterware pottery since the Italian Renaissance. Also spelled maiolica.

 

 

Mandala design

A concentric geometric art depiction symbolic of the universe, used for healing, self-discovery and personal transformation. It is of Hindu and Buddhist origin as an aid in meditation, Incorporating color, balance, repetition and symmetry.

 

 

Matte glaze

A glaze that is nonreflective with a dull, nonglossy surface when fired. A slow cooling period is usually required to prevent it from turning shiny and reflective.
See Glaze, Gloss glaze, Satin glaze

 

 

Mid-range Stoneware

A form of stoneware clay that is optimally fired at moderate cone temperatures, as contrasted with low-range earthenware or high-fired porcelain clay.
See Clay, Cone temperature, Earthenware, Firing, Porcelain, Stoneware

 

 

Mold

A preformed object used in the hand-building process to create a shape or form. It is made of hardened plasters or latex. Clay can be impressed into it or slip cast can be poured in it to shape a structure. When set and dried, the cast becomes an exact negative replica of the mold.
See Hand-building, Latex mold, Slip, Slip cast molding, Slurry

 

 

Mother of pearl luster

Luster glaze made of an emulsion of nacre derived from a composite made from the inner shell of mollusks. It provides an iridescent coloration to a ceramic surface.
See Iridescent luster, Luster glaze, Opalescent luster, Pearlescent luster

Return to top

N

 

Nonplanar silk-screening

In ceramic work, silk-screening has until now been limited to flat clay surfaces only. An innovative approach has been developed by me using a process of rewetting the back of a pre-decorated flat slab of clay so that it becomes malleable again and can thereby be manipulated to change its form from flat to nonplanar, as the artwork demands, without inflicting any damage to the sik-screened surface.
See Rewetting, Silk-screening
For illustrated details, see also Technical Notes: Silk-screening on Nonplanar Surfaces (under construction)

 

O

 

 

Opalescent luster

A coating applied to a ceramic work to provide surfaces with shimmering milky iridescent reflections, similar to pearl, mother of pearl or opal. Also called pearlescent or iridescent luster.
See
Luster

 

 

Overglaze

Any surface decoration applied over a glaze surface. It is usually an oxide wash applied over a raw glaze surface before glaze firing. It may also be a glaze application used at lower temperatures over a previously high-fired glaze surface.

 

 

 

Oxidation    

Firing process that provides an ample supply of oxygen to the ceramic work in the kiln. Usually achieved in an electric kiln.
See Firing, Kiln, Reduction kiln

Return to top

P

 

 

Paddling      

Technique for shaping, thinning, flattening or smoothing leather-hard clay by beating it with a wooden paddle or beater. The paddle can be textured. The process often involves using an external paddle against the counterpressure of a rounded wooden or clay anvil placed internally.

 

 

Paperclay      

A type of clay mixed with processed cellulose, often paper. The clay base can be of any variety, including earthenware, terra cotta, stoneware, porcelain or bone china. It is fired in the same way as other clays. Less shrinkage occurs in the drying stage than with conventional clay. Strong joinery is possible. Objects made with paperclay are stronger, more porous, easier to work with, and more resistant to breakage.

 

 

Patina

The tarnish that forms on the surface of bronze and similar metal works. It is produced naturally by oxidation or other chemical process affecting the surface over time. Patina is often deliberately added by artists to enhance the original design and decoration of an art piece or to simulate antiquity in newly-made objects.

 

 

Pearlescent luster

See Opalescent luster

 

 

Peep hole    

A small aperture in the wall or door of a kiln. It is used to observe the contents during a firing. Primarily used to determine the condition of the temperature cones so as to ensure optimum firing temperatures and to examine the state of the objects being fired. Also called spy hole.
See
Cone, Cone temperature, Firing, Peep hole plug

 

 

Peep hole plug       

A heat-resistant ceramic figure, often decorated, made to snugly fit the peep hole in a kiln. It is kept in place in the peep hole between observations during firings to prevent heat loss.
See Peep hole

 

 

Photo silk-screening      

Adaptation of silk-screen printing technique in which a photographic image is used to create the stencil. The image is first transferred to clear acetate, which is laid over a screen (mesh) that has been treated with a light-sensitive material. Exposing the screen to strong uniform light reproduces the photographic image on the mesh. The mesh is then used as the stencil in the silk-screen process.
See Cut stencil silk-screening, Silk-screening, Silk-screening on nonplanar surfaces
For illustrated details, see also Technical notes: Photo silk-screening

 

 

Plaster  

A white powder of mineral gypsum, calcium sulfate, mixed with water to form a paste that hardens quickly as it dries. It is used in ceramics to make work surfaces and molds for reproducing clay works. Also called plaster of Paris.
See Engobe, Mold, Wedging board

 

 

Porcelain

A form of white stoneware clay that is hard, fine-grained and nonporous. It is often translucent and white in its unglazed form. The mineral composition is kaolin, quartz and feldspar. It is fired to high kiln temperatures above 2,400°F (1,350°C) or cone 11.
See
Ceramic, Clay, Earthenware, Keraflex, Paperclay, Stoneware

 

 

Potter’s wheel

A rotating device with a flat, usually circular, surface for making pottery forms from clay. It may be foot powered or electrically operated.
See
Throwing of the hump, Throwing off the mound, Wheel throwing,

 

 

Press mold

Process by which raw clay is impressed into a preformed mold and allowed to set and air dry to the greenware state so as to create an exact negative replica of the shape of the mold, that is, a duplicate of the original in clay. 
See Cast, Greenware state, Latex mold, Mold, Slip, Slipcast mold, Slurry

 

 

Pulling clay

Technique for producing a long strip or roll of clay, often for use as a teapot handle. A small mound of clay is shaped into an oblong and, with water added, it is carefully elongated by pulling, similar to pulling taffy, so that the clay gradually softens and stretches.

 

 

Pyrometric cone

See Cone

Return to top

Q

 

 

 

R

 

 

Raku firing

A low-temperature (about 1,800° F or 980° C) process of Japanese origin for firing raw-glazed earthenware ceramics. When the fired work reaches glowing hot maximum temperature, it is removed from the kiln with tongs and then placed in a combustible material such as paper or straw. The smoke and fire created by combustion reacts with the glaze to create unpredictable surface patterns.
See Crazing, Firing, Kiln, Reduction kiln, Raku ware

 

 

Raku ware

Ceramic works, usually fragile and porous, produced by Raku firing. After the piece is removed from the kiln, the interstices in the crazed glaze are enhanced by smoking during the cooling period to embed carbon black.
See Crazing, Raku firing

 

 

Reduction kiln

A fuel-burning furnace with an atmosphere containing insufficient oxygen to ensure complete combustion of the fuel, thereby exposing fired works to unoxidized carbon and hydrogen. Firing in a reduction kiln alters the appearance of both the clay and the glaze.
See Firing, Kiln

 

 

Refiring

Sequential technique for repetitive firing of a ceramic piece using progressively lower kiln temperatures to avoid altering or harming previously fired glazes.
See Firing, Kiln

 

 

Relief, Relief sculpture

A sculpture in which the modeled form is raised above (or lowered below) the flat background surface. Three forms include bas-relief (low-relief), which is a shallow projecting image, high-relief, the more prominently protruding work, and sunken-relief, the work lowered into the flat surface.

 

Rewetting

Silk-screening on clay has heretofore been limited to flat, nearly dry clay surfaces. By experimenting, I have developed a process of rewetting the back of a pre-decorated, almost leather-hard flat slab of clay so that it becomes malleable again and can thereby be manipulated to allow me to modify its form to a nonplanar three-dimensional shape, without damaging the silk-screening previously done.
See Nonplanar silk-screening, Silk-screening.
For illustrated details, see also Technical Notes: Silk-screening on Nonplanar Surfaces (under construction)

 

 

Rubber mold

See Latex mold.

Return to top

S

 

 

Sanding

The process of smoothing the rough edges or unwanted projections of a ceramic work after the first greenware state firing and before the bisque state firing. Different grades of fine sandpaper are used on the surfaces that have not been perfected in the greenware state to make the surface optimal for glazing. I try to perfect my work in the leather-hard state, thereby reducing the difficulty and time needed for sanding in the bisque state. Some use wet sandpaper, but I prefer dry; this avoids the problem caused by rewetting the dried surface, which impedes the subsequent glazing process. Sanding by hand gives best control for smoothing; but for particularly rough areas, I sometimes use a Dremel drill with sanding attachment.
See Bisque state, Cone, Dremel drill, Firing, Glaze, Greenware state, Leather-hard state

 

Satin glaze

A glaze with a degree of reflectance between dull non-reflective matte glaze and shiny fully reflective gloss glaze.
See Glaze, Gloss glaze, Matte glaze

 

 

Score and slip

Technique used for joining two pieces of leather-hard clay together. It consists of three steps: First, the sites to be joined or adhered are scored, that is, the edges are roughened. Second, the parts are slipped, that is, the sites to be joined are moistened with slip, used as if it were glue. Third, the pieces are pressed and held together.
See Greenware state, Hand building, Leather-hard state, Slab building, Slip, Slurry
For illustrated details, also see: Technical notes: Hollowing

 

 

Sculpting, Sculpture

Process of creating a three-dimensional work of art by various methods. In ceramics, sculpting is done primarily on clay in the wet or raw state, although it can also be further worked, by carving for example, in the drier greenware state. Sculpting refers to adding clay to the art work, with pieces of wet clay added bit by bit; this permits pushing, bending and other manipulations of the clay with fingers or tools. Sculpting differs from carving, which generally implies taking clay away in the leather-hard or greenware state, usually using a knife to scrape, scratch, chip or other means for removing bits of the clay. Carving is less forgiving, trickier to use, and requires some degree of finesse because the clay becomes more and more vulnerable to damage during the process. Unlike sculpting, carving is not a spontaneous method. Chipping may cause a piece of the work you wish to retain to break off. Sculpting is the most spontaneous and free-form method of constructing art objects in clay, beginning simply with a mound of clay and manipulating it with one’s hands to make forms and modifying it further with simple sculpting tools for more detail work. Bits of clay are added as needed. If the work becomes large and unwieldy, it can be divided so that each half can be individually hollowed out; the sections are then joined together by scoring and slipping method.
See Altering form, Carving, Greenware state, Hand building, Mold, Paddling, Press mold, Relief, Score and slip, Slab building, Slip cast molding, Wet state

 

 

Sgraffito

A decorating method achieved by scratching or carving through a layer of previously-applied slip or glaze. It is done to expose the underlying contrasting clay coloration prior to firing. From the Italian scratch.

 

 

Silk-screening

A printing technique in which a finely-woven fabric, called mesh (originally of silk, but currently nylon or polyester), is stretched across a frame and used to support an ink-blocking impermeable stencil. The stencil is a negative of the image that is to be printed with open spaces where ink will appear. The open areas in the stencil allow transfer of ink or paint onto a substrate. A roller or squeegee is moved across the screen stencil forcing ink past the mesh threads onto the printing surface so as to print the desired image. Also called serigraphy or screen-printing.
See Cut stencil silk-screening, Photo silk-screening, Nonplanar silk-screening
For illustrated details, see also Technical Notes: Silk-screening on Nonplanar Surfaces (under construction)

 

 

 

Silk-screening on nonplanar (non-flat) surfaces

Silk-screening has been limited to flat surfaces heretofore. An innovation of mine permits silk-screening on surfaces that are not flat. The technique involves wetting the back of a clay slab upon which an image has been silk-screened in the stiff, almost-dry leather-hard state. Wetting serves to revert the piece to its more flexible and pliable wet clay state so it can be worked on by modifying its shape as the artistic design might require without damaging or distorting the silk-screen image.
See Cut stencil silk-screening, Photo silk-screening, Silk-screening
For illustrated details, see also Technical Notes: Silk-screening on Nonplanar Surfaces (site page still in progress)

 

 

 

Sintering

Solidification process that occurs when clay is kiln-fired at relatively low temperatures. Particles within the clay stick together to form a hard mass. With still higher temperatures, the strength of the bond that forms between refractory particles increases, enhancing structural integrity, but still leaving the clay porous. Clay that is low-fired to bisque state are sintered but not vitrified.
See Bisque
, Clay, Firing, Kiln, Vitrification

 

 

Slab 

Clay piece that is pressed or rolled flat for use in hand building.
See
Hand building, Slab building

 

Slab building

A hand-building technique that involves forming and joining flat slabs of wet clay to create a three-dimensional ceramic art object. 
See Hand building, Wet state
For illustrated details see also Technical notes: Hand building

 

 

Slip  

Clay mixed with water to a semiliquid viscid suspension, about the consistency of heavy cream. It is applied as a surface treatment for ceramic works in their leather-hard state for purposes of casting, decoration to affect color and texture, or functionality, such as sealing the surface to reduce permeability to fluids. It can be applied by dipping, pouring or painting. It can also be used by casting into plaster molds to create ceramic forms. Clay slip also serves as the glue for joining clay slabs in the process of scoring and slipping.
See
Mold, Score and slip, Slip cast molding, Slurry

 

 

Slip cast molding

A three-dimensional mold from plaster. First, a complex plaster mold is made. Second, slip is poured into it. Finally, when the slip has set to a hard consistency, the two- or three-part mold is removed, leaving a finished solid or hollow ceramic piece.
See Cast, Latex mold, Mold, Press mold, Slip, Slurry

 

 

Slumping  

Collapse of a ceramic object during firing at very high kiln temperatures that exceed the temperature needed for the optimal vitrification process so that the work sags, sinks, melts, deforms or puddles. Another form of slumping is deliberate distortion for its artistic effect during the earliest phase of the construction of a ceramic work, while the clay is in the wet state, fresh from the bag. In this state, it is highly plastic, easily molded and readily manipulable. It can be rolled out, press molded, and then "draped" on a mold or other form to create a new shape that sags or slumps. Additionally, sometimes slumping can introduce unexpectedly interesting dividends, adding to the gestural fluidity and spontaneity of a work. To prevent uncontrolled distortion by slumping, it is essential to allow the worked clay to dry to the leather-hard state before lifting it from the cast support and before assembling press mold sections.
See Drying, Greenware state, Kiln firing, Press mold, Leather-hard state,Vitrification Wet state

 

 

Slurry

Clay mixed with a small amount of water to form a very thick clay slip. It is often used for joining slabs of clay after the surfaces have been scored.
See
Score and slip, Slab, Slab building, Slip

 

 

Soda firing

Atmospheric firing technique in which a solution of soda (sodium bicarbonate, called baking soda or soda ash) is introduced by spraying into kiln ports at high temperature of 2,350°F (1,290°C) or cone 6. The soda vaporizes to combine with the silica in clay so as to create a glaze on the surfaces of ceramic works loaded within the firing chamber.
See
Firing, Glaze, Kiln

 

 

Soft-cut technique

A printmaking method originally using incised linoleum for the template. Commercially-available Soft-Kut was adapted by me after much experimentation for designing patterns in clay. It serves well as a medium for press mold because it is softer and easier to cut.
See
Image transfer, Mold, Press mold

 

 

Spraying

Application of a liquid slip, glaze or stain using mechanized air-spray equipment. It provides a smooth glaze coating, but avoids pooling of glaze in surface recesses.
See Air-brushing, Air-compressor, Glaze, Slip, Stain

 

 

Spy hole

See Peep hole

 

 

Stain

A liquid ceramic colorant made of powder ground from fired oxides or combinations of oxides and opacifiers for use as transparent or opaque glaze, engobe, slip or color mix for clay. In water suspension, stain can serve for overglaze brushwork or as a patina on unglazed clay.
See
Engobe, Glaze, Slip, Slurry

 

 

Stencil silk screening

See Cut stencil silk-screening

 

 

Stoneware clay

A type of clay that is fired at high temperatures to produce hard and durable ceramic objects. Fired at temperatures of 2,200-2,400°F (1,200-1,350°C), the equivalent of cones 5-11.
See
Cone, Cone temperature

Return to top

T

 

 

Tagboard template

A template made of tagboard, a strong form of cardboard, for use as a guide in making clay slabs into prefigured shapes.
See Template

 

 

Teabag

Designation of Meryl Ruth’s ceramic works in which functional teapots are created in the form of handbags.

 

 

Teapet

Coined word for Meryl Ruth’s ceramic art pieces that incorporate pets and other animal forms as an integral design element.

 

 

Template

Master mold or pattern cut in cardboard or other material with a prefigured shape. It is used as a guide for rolling out clay and cutting it into the desired pattern. Also called pattern piece.
See Tagboard template

 

 

Terra cotta

A form of low-temperature ceramic clay that is used primarily for making pottery and tiles. Products made of terra cotta are durable, but porous. Terra cotta fires to a red-brown color because of its high iron content. From the Italian baked earth.

 

 

Terra sigillata

Ultrarefined clay slip that provides a soft sheen to the surface of a ceramic object to which it is applied. It can also be polished or burnished while damp to give it a high gloss. Its long history reflects use in ancient times. From the Italian sealed earth.
See Glaze, Slip, Slurry

 

 

Throwing

See Wheel throwing

 

Throwing off the mound, Throwing off the hump

A common wheel-throwing technique that facilitates making small ceramic objects quickly. A large mound (hump) of clay is prepared on the wheel, but it is unimportant for it to be perfectly centered. The mound is worked on the wheel into a large cone of clay. A small segment near the top of the cone is selected for the focus of the throwing process for purposes of centering and forming the tiny object atop the main mound. When complete, the new form is cut from the underlying mound of clay with taut string and set aside. Besides being a convenient means for making diminutive ceramic elements, the process can be repeated as often as needed until all the little component parts of an artwork are made. I find it a great method for creating tiny spouts, bowls, decorative attachments and even tiny teapots, as well as lids of any size.
See Potter's wheel, Wheel throwing

 

 

 

 

 

Tooling

See Trimming

 

 

 

Torque

Undesirable rotational distortion that takes place during kiln firing, akin to slumping. It is particularly seen with projecting appurtenances that have been wheel-thrown, such as teapot spouts. It results because throwing clay on a potter’s wheel compresses and twists it. Clay has “memory” of its original form so it may unravel or untwist in the course of firing. As a consequence, misalignment of the protruded part will often occur. The ceramicist is well advised to anticipate this before firing by compensating for it. The precise amount of compensation is difficult to determine in advance since the degree of rotation that may take place is variable. It is dependent on many factors, including how the clay part is thrown (that is, how much torque force is introduced to twist the clay while forming its shape on the wheel), whether the worked clay is also altered, and the kiln temperature. The rule of thumb I use, albeit not foolproof, is to affix a spout at the 5 o’clock position if I want it to rotate itself to 6 o’clock during the firing process. Since individual ceramicists throw clay differently, correcting for torque distortion requires trial and error.
See Potter’s wheel, Slumping, Wheel throwing 

 

 

 

Trimming

The process by which the bottom of a plate or vessel is finished on the potter's wheel. After the piece has been thrown, it is allowed to dry somewhat to set up to the leather-hard state. It is returned to the wheel face down, where trimming tools areused to carve off excess clay on the bottom to shape and reveal a lovely foot that matches the structure of the ceramic object.
See Ceramic, Leather-hard state, Potter's wheel, Wheel throwing
For illustrated details, see also Technical note: Trimming

 

 

Trompe l'oeil

A style of highly realistic, detailed painting in which the senses are tricked into perceiving the flat two-dimensional image as a three-dimensional illusion. From the French for “deceives the eye.”  Although the technique was revived in Baroque times and more recently popularized (by a wide range of artists from Tiepolo and Peale to Dali, Harnett and Magritte, and latterly to Latzke and Orosz, among many others), it actually originated in ancient Greek and Roman painting and mosaic works. Synonymous with photorealism.

Return to top

U

 

 

Underglaze

Colored slip that is applied to thoroughly dried greenware or bisque-fired objects. Formulated to have low shrinkage on drying. A wide palette of colors is available for low-fire use. Many will survive high-fire exposure as well. Underglazes can be applied for decorative effects directly to bare bisque-fired clay surfaces where they will fuse when fired again.
See
Engobe, Glaze, Overglaze, Slip, Slurry

Return to top

V

 

 

Velvet glaze

A matte finish glaze that imparts the look of velvet to the surface of a ceramic work.
See Glaze, Gloss glaze, Matte glaze, Satin glaze

 

 

Vitreous

The glassy amorphous state of clay, as contrasted with its crystalline state, achieved by firing to very high temperatures in a kiln.
See Firing, Vitrification

 

Vitrification

Process by which clay is converted from crystalline to a glass-like amorphous solid, accomplished by heating in a kiln to very high temperatures, well above the temperature needed for sintering. It decreases the porosity of the clay work so that it becomes impermeable to liquids, that is, water tight.  Also called glossification.
See Firing, Sintering, Vitreous

Return to top

W

 

 

Wedging board

A smooth, sturdy surface area, usually of wood, stone, slate, marble or canvas-covered plaster, for use in wedging (kneading) raw clay to a homogeneous workable state free of hidden air pockets and devoid of any stiff dry areas or soft moist areas. Wedging makes clay easier to work with and decreases the chances of damage while drying or firing.

 

 

Wet state

Raw clay before it is allowed to dry. It is in this state that clay can be rolled into slabs, shaped, thrown, bent or molded prior to drying or firing. If allowed to dry partially, before it becomes leather-hard, it can be printed upon by silk-screening or photo silk-screening. The proper degree of wetness or drying for a particular manipulation takes control and experience. Other clay states besides the wet state include leather-hard (greenware), bisque and glazed.
See Bisque, Clay slab, Glaze, Greenware state, Leather-hard state, Molding, Photo silk-screening, Silk-screening, Throwing

 

 

 

Wheel

See Potter's wheel

 

 

Wheel throwing

The process of creating a ceramic form from raw clay on a potter’s wheel.
See Potter’s wheel, Throwing off the hump, Throwing off the mound

 

 

X

 

 

Y

 

 

Z